This 3 megapixel microscope camera is your best workhorse. The camera features a 2/3 sensor with an image diagonal of 11 mm. In combination with the number of pixels, you have all the advantages of high resolution imaging. The cooled quad-port CCD camera with its four outputs provides exceptional versatility and offers you benefits such as a wide range of exposure times, binning up to 5 × 5 for super sensitive detection, a choice of lowest noise single port or high-speed multiport read-out modes, and very low levels of read-out noise.You will enjoy working with a high quality and rapidly refreshed live image as well as extreme sensitivity for low light and live cell imaging. Its high sensitivity lets you use short exposure times, even with weak fluorescent markers, preventing damage to your samples. ZEISS Axiocam 503 mono (USB3, 2.8MP, 2/3). High Performance 2/3 CCD Microscopy Camera.
1936 (H) x 1460 (V) = 2.8 Mega Pixels. 4.54 µm x 4.54 µm.
8.8 mm x 6.6 mm, equivalent to 2/3 (diagonal 11 mm). 400 nm to 1000 nm Max. Amount of charge per pixel. 15,000 e Full Well Capacity. H x V / binning factor.
1936 x 1460 / 1x1 basic resolution. 968 x 728 / 2x2.640 x 484 / 3x3. 384 x 292 / 5x5. (depending on hardware and software configuration) exposure time 10ms, color enhancement off, 39Mhz pixel clock, quadport readout mode. H x V / binning factor / frame rate.
Refresh rates for time series recordings. "Continuous Mode" with 39Mhz pixel clock and Quadport readout mode (depending on hardware and software configuration). Time-series recording at maximum rate via "Burst Mode" function.Readout of sensor subareas ("ROI"). Freely definable Digitization: 14 bit / 39 MHz or 13 MHz pixel clock.
Single, dual quadport, automatic mode. 0.06 e / p / s. 1 ms to 60 s.
Single-stage, regulated Peltier cooling to 18 ° C sensor temperature. Additional digital dark current correction. Eight pre-loadable image parameter sets for fast parameter changes. Transmission of recording timestamp with image data. Status LED camera: color-coded display for operating status, dimmable.Status LED Trigger: color-coded display for status trigger signals, dimmable. Galvanically isolated I / O signals for exposure time, readout time, ready (eg for controlling external electrical locks), 1 trigger-in for start recording, 5V auxiliary voltage, GND. USB 3.0, 240 MBytes / s, 3m dual USB cable with USB3.0 and USB2.0 Optional operation at USB 2.0 with reduced frame rate possible, optional operation without cooling at short exposure times with reduced power consumption possible. C-mount, Teflon coated thread, penetration depth for lenses: Max. 5.6 MB at 1936 x 1460 pixels with 14 bit / pixel. 10.8 cm x 7.8 cm x 4.3 cm / 500 g. Blue anodized aluminum with cooling fins, 1/4 photo thread connection. USB 3.0 cable for the camera electronics, USB 2.0 cable for Peltier cooling, power consumption: 7 W (5V, 1.4A). + 35 ° Celsius, max.
80% relative humidity, non-condensing, free air circulation required. Windows 7x64 SP1 ZEN 2012 SP2 (blue edition) or higher. USB 3.0 PCIe x1 interface. Dual USB 3.0 / USB 2.0 cable 3 m.
Driver software, USB 3.0 PCIe x1 interface, Dual USB 3.0 / USB 2.0 cable 3 m and protective glass BK7 (tempered). Software ZEISS ZEN 2 starter.
This item is in the category "Business & Industrial\Healthcare, Lab & Dental\Medical/Lab Equipment Attachments & Accessories\Microscope Parts & Accessories\Microscope Camera & Lens Adapters". The seller is "mannyrod88" and is located in this country: US.This item can be shipped to United States.