Model: Camera with HDMI USB2.0 two output Image format: jpg. Video format: MOV(for TF card). It build in digital crosshairs and color control, add line in the pictures, freeze.Supply USB2.0, HDMI HD video, Two output ports. 1,1400 million pixels Japan's Panasonic COMS Sensor. 2, the product has a 14 million pixel camera and 720p video recording using the mode key to cycle switch. Mode button which I switch mode, the default for the camera mode, press once to adjust for the video, and then press the preview mode, cycle switch. 3, the product provides 8 times digital zoom; hold down the up or down key to digital zoom in or out, long press to quickly zoom in or zoom out, short by a local zoom in or out.
4, this product provides HDMI high-definition video output interface, the output size of 720p 60hz. 7, the product provides free drive 1080P 30 frames / sec high-definition usb video output. 8, this product supports a key image freeze / thaw function, press the on / off button to achieve after freezing and thawing function. 9, the product provides cross-line function, horizontal line 4, vertical line 4, support line optional and mobile, and display line color settings and thickness adjustable, while providing the center cross cursor display.
12, support automatic and manual exposure. 13, support EV value (exposure compensation) adjustment. 14, support English, Chinese Traditional, Simplified Chinese and other multi-language settings.
15, support 50Hz, 60Hz light source frequency selected settings. 16, support HCSD T-flash card (Class 4), the largest road 32GB. 18, support shutdown save settings function.
1, HDMI high-definition video output interface. 2, USB B-type high-definition video output interface.4, DC interface (Note: DC 12V). 1, switch machine / freeze / thaw key. 3, on / + button. 4, the next / - button. 5, the camera / video / confirm button. 6, mode switch / AE button. The first step: power supply. Please insert the original machine with 12V DC power supply DC jack. Note: The device can also be powered by USB. Short press the key, then the red indicator light, the device starts normally. The third part: access to display devices, enter the preview state.
If the camera is connected to a display device through HDMI high-definition output interface, the camera will output the preview image on the display device. In this case, the device is in the camera mode (green indicator light is not on); if through USB and display devices (such as PC, Support UVC display settings) connected to the display device will output camera preview image. Note: If you plug in the USB first and then HDMI, the video output will automatically switch to the HDMI output.
In the case of HDMI output, this time as a short press the camera button, then the other will automatically take a 14 million-pixel photo, and JPEG format stored in the T-flash. Note: Before operating this step, make sure that the device has a T-Flash card (Class 4 or higher) with a capacity of not less than 2 GB. Otherwise, the device will prompt the card for errors.
Note: After inserting the T-Flash card, if there is still an error message, or the card is wrong when you press the camera button, please select the format in the menu, format the T-Flash card (see the operation instructions for formatting). In the HDMI output state, press the mode switch key at this time, then the green indicator light, indicating that the device has entered the video preview state, this time if the short press the record key, the green light starts flashing rules, the device starts recording, video file H. 264 encoded 1080P 30 frames / second high-definition video, and will be saved to the T-Flash card. In the HDMI output mode, if you press the up / + button briefly, the device will zoom in (zoom in) the digital zoom of the preview image.
If you press the / - button briefly, the device will digitally zoom out the preview image , The lower part of the display will show zoom in and out. In the HDMI output state, in the preview state, such as short press the switch / freeze key, the preview image freezes, then press the short press the button, the preview image thaw. 5, automatic, manual exposure switch.
In the HDMI output state, the device automatically switches to manual (or auto) exposure in the preview mode, such as the short press mode switch / AE key. NOTE: The device defaults to automatic exposure.In the HDMI output state, in the preview state, press the MENU key, in the pop-up menu options, select the line shows a, press the OK button, then you can choose to display or not display lines, such as select the display line, , Then press the MENU button to exit the menu, the display device will display horizontal 4, vertical 4 of 8 support, evenly distributed in the display device. 7, lock the line, move the line.
In the HDMI output state, in the preview state, press the MENU key, in the pop-up menu options, select the line to move a, enter the next menu, and then select the line to be locked (horizontal line H1-H4, vertical line V1 -V4), enter the next menu, this can be used to set the display, do not show, move a line. If you choose not to display, press the OK key, then press the MENU button to exit the menu, then display the corresponding lines will disappear. If you want to move, press the OK key, then press the MENU button to exit the menu, this time, such as the up / down keys, which can move up or down or left and right selected lines. In the HDMI output state, in the preview state, press the MENU button in the pop-up menu options, select the line thickness settings, enter the next level menu, then choose a total of 4 levels of line thickness settings, and then press OK key, then press the MENU button to exit the menu, the thickness of the line will appear corresponding changes. In the HDMI output state, in the preview state, press the MENU button in the pop-up menu options, select the line color settings, enter the next menu, then select a total of 5 kinds of line color settings, and then press OK Key, and then press the MENU button to exit the menu, the color of the line will be a corresponding change.10, cross star display settings. In the HDMI output state, in the preview state, press the MENU key, in the pop-up menu option, select the display cross-Star setting a, enter the next menu, then choose to display or not display cross star, Display, press the OK key, then press the MENU button to exit the menu, then the display device center will appear a cross star. In the HDMI output state, in the preview state, press the MENU key, in the pop-up menu options, select the language settings, enter the next menu, then you can select the language to use, press the OK key, then press MENU button to exit the menu, then the device menu prompt language will be the corresponding switch to the selected language. 12, the light source frequency settings. In the HDMI output state, in the preview state, press the MENU key, in the pop-up menu options, select the light source frequency settings, enter the next level menu, then you can choose to use the light source frequency (50Hz or 60Hz) Press the OK key, then press the MENU button to exit the menu, then the device preview screen will enter the selected light source frequency of the state. In the HDMI output state, in the preview state, press the MENU button in the pop-up menu options, select the exposure compensation settings, then, below the display device will display several exposure compensation, then press the +/- key, Corresponding to the corresponding direction of the adjustment, the preview screen will make the appropriate compensation response, press the OK button, then the device will determine the corresponding exposure compensation state. In the HDMI output state, in the preview state, press the MENU key in the pop-up menu options, select the format, then, will remind the user whether to format the T-Flash card, then, The TF card inserted into the device is formatted. Note: During this operation, please make sure you want to format the T-F card in the device. After this operation, the contents of the T-F card will be cleared. 15, return to factory settings. In the HDMI output state, in the preview state, press the MENU key, in the pop-up menu options, choose to restore factory settings, then, will remind the user whether to return to factory settings, this time, if you select Yes, the device The error setting and the status will be restored to the factory state. Note: When you do this step, make sure you are sure you want to return to the factory settings. After this operation, the device will erase all previous settings for the device. 1x C Mount Adapter(C Port to 23.2mm, 30mm and 30.5mm ring adapter). Directed from factory, welcome wholesaler! It is easy and safe! 100% satisfaction is our goal! We will do our best to resolve problems for you. The item "16MP HDMI USB Digital Industry Video Microscope Camera Eyepiece C mount Adapter" is in sale since Tuesday, December 3, 2019. This item is in the category "Business & Industrial\Healthcare, Lab & Dental\Medical/Lab Equipment Attachments & Accessories\Microscope Parts & Accessories\Other Microscope Parts & Accessories". The seller is "hunter20099" and is located in China. This item can be shipped worldwide.